Blog
A worked property tax example
A hypothetical assessed value run through each 2026 class rate, with the arithmetic shown and why the result is not a tax on market value.
Rates are easier to understand with numbers in them. The Department of Finance publishes the property tax rates for tax year 2026, and anyone can read them. What the published table does not do is show a bill. This piece does that, with a made-up property and arithmetic you can check on a calculator.
Everything below the line "Say a property" is hypothetical. The assessed values are invented for illustration. The rates are the real ones for tax year 2026, from the Department's rates page. The point is the method, not the result.
The rates
For tax year 2026 the Department of Finance lists four rates, one for each class:
- Class 1: 19.843 percent
- Class 2: 12.439 percent
- Class 3: 11.108 percent
- Class 4: 10.848 percent
The rate is applied to the assessed value, not to the market value or the price a buyer paid. That is the one rule to hold on to. Everything else follows from it.
Step one: pick an assessed value
Say a property has an assessed value of $60,000. That is the figure on the Department's books for the property, not what it would sell for. (The assessed value of a real property depends on its class and the Department's valuation, and it is shown on the tax bill and on the Department's property pages. The number here is invented.)
Step two: multiply by the rate
The tax before any exemption or abatement is the assessed value times the rate. Here is the arithmetic for each class, using the same $60,000.
Class 1. $60,000 times 0.19843 is $11,905.80.
Class 2. $60,000 times 0.12439 is $7,463.40.
Class 3. $60,000 times 0.11108 is $6,664.80.
Class 4. $60,000 times 0.10848 is $6,508.80.
Here are the same results in a table.
| Class | Rate | Assessed value | Tax before exemptions |
|---|---|---|---|
| 1 | 19.843% | $60,000 | $11,905.80 |
| 2 | 12.439% | $60,000 | $7,463.40 |
| 3 | 11.108% | $60,000 | $6,664.80 |
| 4 | 10.848% | $60,000 | $6,508.80 |
What the table does and does not mean
A reader might look at the table and conclude that the same property would be taxed at $11,905.80 as Class 1 and $6,508.80 as Class 4. That reading is wrong, and the reason is the point of the exercise.
A real property is in one class, not four. The table puts one invented assessed value through four rates to show how the rate changes the result, holding the assessment constant. In real life the assessed values differ from class to class and from property to property, because the Department assesses each property by its own methods and the assessed value is not a fixed share of the market value across classes.
So the comparison to take from the table is the narrow one: for the same assessed value, a higher rate yields a higher tax. The comparison not to take is that Class 1 owners pay more than Class 4 owners in any given case, because the assessed values are different.
Step three: the bill is not market value times the rate
Now the myth that this section exists to correct. Say, hypothetically, a Class 2 property sells for $1,000,000. Does the buyer owe 12.439 percent of $1,000,000, or $124,390 a year?
No. That would be a tax on market value, and the city's system does not work that way. The tax is the rate times the assessed value, and the assessed value is the Department's figure. In the example above, a Class 2 assessed value of $60,000 produces $7,463.40 before exemptions. The assessed value of $60,000 is not the sale price, and it is not meant to be.
The difference between $124,390 and $7,463.40 is the difference between the wrong and right methods. It shows why the first step in understanding a bill is to find the assessed value, and why people who see a rate in the 10 to 20 percent range are not facing a tax on their home's value. The explanation of why the rates look so high is in how property tax classes work.
Step four: what could change the bill
The calculation above gives a number before exemptions and abatements. The Department's pages on property tax bills, assessments and exemptions list what may apply. A few things to look at:
- Exemptions. Some properties qualify for exemptions that reduce the assessed value or the bill. The Department's pages describe them.
- Abatements. These reduce the tax directly, and the Department's pages list them.
- A change in the assessed value. If the Department raises or lowers the assessment, the bill moves with it. A $5,000 increase in the Class 2 assessed value above would add $622 to the tax (5,000 times 0.12439 is $621.95).
- A change in the rate. The rates are set each year. A property's tax can change if the rate changes, even if the assessed value does not.
The final bill is the result of all four. For the Department's own explanation, see How NYC property taxes work: classes, rates and the bill.
A second hypothetical: the effect of a change
A second example shows how sensitive the bill is to the assessed value. Say a Class 1 property has an assessed value of $40,000. The tax is $40,000 times 0.19843, or $7,937.20. Say the assessed value rises to $44,000. The tax becomes $44,000 times 0.19843, or $8,730.92. The difference is $793.72 a year (8,730.92 minus 7,937.20), which is 10 percent more tax for a 10 percent rise in the assessed value.
That is the straight-line relationship: with the rate fixed, tax moves in proportion to the assessed value. It is why owners watch their assessment notices so closely, and why an assessment that rises faster than the owner expected can produce a bill that surprises.
A third hypothetical: an abatement
Suppose, again as an invented case, that the Class 2 property above qualifies for a reduction of $1,000 on its bill. The Department's pages list the abatements and exemptions that exist and the rules for each. The arithmetic is simple: $7,463.40 minus $1,000 is $6,463.40. The reduction is a flat amount off the tax, in contrast to an exemption, which typically works on the assessed value before the rate is applied. Say a hypothetical exemption removed $10,000 from the $60,000 assessed value: the taxable assessed value would be $50,000, and the tax would be $50,000 times 0.12439, or $6,219.50. Note the difference. A $10,000 exemption saves $1,243.90 (7,463.40 minus 6,219.50), which is more than the $1,000 abatement, because the exemption is multiplied by the rate while the abatement is not.
These figures are invented, and a real exemption or abatement has its own rules. But the contrast shows why the words matter, and why the Department's pages describe each program separately.
Common mistakes
Three errors come up often when people try to estimate a bill.
- Multiplying the rate by the price. The rate applies to the assessed value. A sale price of $1,000,000 times 12.439 percent is $124,390, which is not what a Class 2 owner owes unless the assessed value happened to be $1,000,000.
- Forgetting the class. The rate depends on the class. Using the wrong class gives the wrong rate, and the difference between 19.843 percent and 10.848 percent is nearly nine percentage points.
- Ignoring exemptions and abatements. The calculation above gives a figure before them. The Department's pages show what applies to a property.
A fourth, smaller one: the rates are for tax year 2026. A bill for another year uses that year's rates.
Checking your own bill
To check a real bill against these steps:
- Find the property's class on the bill or on the Department's property page.
- Find the assessed value.
- Find the rate for the tax year. For 2026 it is in the table above.
- Multiply: assessed value times rate.
- Compare the result with the bill before exemptions and abatements, and read the Department's explanation of any difference.
If the number does not match, the likely reason is an exemption, an abatement or a payment arrangement, and the Department's pages are where to confirm it.
Why this matters to buyers
A buyer thinking about a purchase should not guess at taxes from the price. The Department of Finance's pages show the current assessed value, the class and the bill for a property, and the seller or the listing may state the annual taxes. The steps for evaluating a purchase are in Buying property in New York City: taxes, records and who to check, and the broader numbers about owner costs in the city are in what owning costs in the five boroughs.
The Department itself, by its own account, values about 1.1 million taxable properties with a total market value of more than $1.7 trillion. That scale is why it relies on systematic methods rather than looking at each sale. The figure explains the method: a city with 1.1 million taxable properties cannot assess each by a single transaction.
Where to confirm the numbers
The rates and the property pages are on the Department of Finance's site. The rates page is https://www.nyc.gov/site/finance/property/property-tax-rates.page and the bills page is https://www.nyc.gov/site/finance/property/property-tax-bills.page. The 311 line can help a resident find the right office, at (212) 639-9675 from outside the city.
This is general information, not tax advice. The examples use invented values to show the arithmetic; a real bill depends on the property's actual assessed value, its class and any exemptions or abatements. An owner with a specific question should consult the Department of Finance or a qualified professional.