Blog

The LIRR's Port Washington Branch in Queens

How the LIRR Port Washington Branch crosses northern Queens, stopping at Flushing Main Street and Bayside, and how it differs from the 7 train.

There are two ways to get from Flushing to Manhattan without a car, and they are so different that locals tend to have a settled loyalty to one or the other. The first is the 7 train, the elevated subway line that runs above Roosevelt Avenue and the rest of northern Queens, with a stop every few blocks and a ride that takes as long as it takes. The second is the Long Island Rail Road's Port Washington Branch, which stops at Flushing Main Street, runs mostly at ground level or on embankments, and gets to Midtown in a fraction of the time, at a higher fare and on a timetable.

The second option is the one that most people do not know about. The Port Washington Branch is a commuter railroad in a part of the city that thinks of itself as subway country, and it is worth understanding, both for what it offers and for what it says about how transit in Queens is layered.

What the LIRR is

The Long Island Rail Road is the commuter railroad of the Metropolitan Transportation Authority, running from Manhattan and Brooklyn out across Long Island. It is one of the oldest railroads in the country still operating under its original name, and it is the busiest commuter railroad in North America, a fact that locals know in their bones from rush-hour crowds. In Manhattan, the LIRR serves both Penn Station and Grand Central Terminal, according to the MTA's guide to the city's rail stations. In Brooklyn, its terminal is Atlantic Terminal, which the story in Fort Greene, Clinton Hill and Atlantic Terminal describes.

A "branch" is one of the line's several arms. The Port Washington Branch is the one that serves the north shore of Queens and the northwestern edge of Nassau County, ending at Port Washington, on Long Island's Manhasset Bay. Within New York City, it runs through northern Queens, and two of its stations are the focus of this piece: Flushing Main Street and Bayside.

Flushing Main Street

Flushing Main Street is the branch's station in the heart of Flushing, the Queens neighborhood that is home to the biggest Chinatown in the borough and in all of New York City, according to the MTA's neighborhood guide. The LIRR station is a short walk from Main Street's busy commercial blocks, and it is only a few minutes' walk from the subway terminal of the same name, Flushing-Main St, where the 7 train ends its run. That means Flushing has both services within a stone's throw of each other.

A rider at Flushing Main Street can choose. The 7 is the local: it runs frequently, costs the standard subway fare, and has a stop at nearly every neighborhood on the way. The LIRR is the express. It makes only a few stops in Queens, runs at set times and charges a fare set by the railroad, according to distance and time of day. For a commuter whose destination is Penn Station or Grand Central, the train can cut the ride dramatically. For a rider going to any of the neighborhoods the 7 serves, the subway is the way.

The neighborhood itself is a draw. Flushing's streets are famously busy, with food courts, markets and shops that serve a large and varied community. The area is the subject of Flushing's food courts on Main Street and the comparison in Manhattan's Chinatown and Flushing's, compared. For a longer look at what the neighborhood has to offer, see Flushing.

Bayside

Farther east, the branch stops at Bayside, a residential neighborhood in northeastern Queens that has no subway line of its own. For Bayside, the railroad is the rail link to Manhattan: the neighborhood sits too far from the subway for the 7 to serve it, and its residents rely on the LIRR, on express buses and on cars. The station is the center of a small commercial district of shops and restaurants, and the streets around it are lined with houses and apartment buildings.

Bayside is a good example of how the five boroughs differ. The neighborhood feels in many ways like a suburb, with single-family houses, yards and a waterfront on Little Neck Bay. It is a part of the city that is not served by the subway and that depends on commuter rail, which is a reminder that the five boroughs include places that a visitor with a subway map would never find. The extreme eastern end of Queens, near the Nassau County line, has this character throughout.

How the branch differs from the 7

To see what makes the two services different, it helps to put them side by side.

The 7 train The Port Washington Branch
Operator MTA New York City Transit MTA Long Island Rail Road
Type Subway, elevated through much of Queens Commuter railroad
Stops Many, roughly every few blocks Few in Queens
Fare The subway fare, $3 as of 2026, with tap-and-ride Set by the railroad, by distance and time of day
Frequency Frequent all day Set timetable, more frequent at rush hours
Manhattan stops Times Sq and western Midtown Penn Station and Grand Central
Reaches Long Island City, Woodside, Jackson Heights, Corona, Flushing Flushing, Bayside and the Nassau County shore

The table makes the point clearly: the two services overlap in geography but not in purpose. The 7 is a neighborhood line that connects a string of communities, and the branch is a regional line that connects a few of them to the city's center and beyond. A resident of Flushing who works in Midtown might take either, depending on the hour and the schedule. A resident of Bayside takes the railroad or does not go by rail at all.

The seven-day $35 cap that applies to subway and local bus rides under the tap-and-ride system does not apply to the LIRR's own fares, which are set separately. Anyone planning a trip should check the MTA's site for the current fare table and train times. The subway system is covered in Riding the subway and buses: fares, OMNY and the weekly cap, and the 7 in particular in Riding the 7 train to Flushing.

The rest of the line

East of Bayside, the branch continues into Nassau County, with stops at Douglaston and Little Neck, which sit right at the city line, and then on toward Port Washington. West of Flushing, the line runs toward Manhattan, passing through northwestern Queens and into the tunnel under the East River that leads to Penn Station. On game days and at other large events, a stop serves the area near Citi Field, the Mets' ballpark, which sits in Flushing Meadows-Corona Park; the details of the ballpark's history are in Citi Field and Shea Stadium.

The park, one of the biggest in the city at 870.76 acres, was the site of the 1939-40 and 1964-65 World's Fairs, a history told in The 1939 and 1964 World's Fairs compared. It is the sort of place that the railroad can serve on a special-event basis and the subway serves every day, and a visitor who wants to get there has a choice. The 7 stops at Mets-Willets Point, and the park is described in Flushing Meadows-Corona Park and its two World's Fairs.

Why Queens has both

It might seem strange that a borough with so many subway lines also has a commuter railroad running through it. The reason is historical. Queens grew up along its railroads. In the late nineteenth and early twentieth centuries, the LIRR was the main way for people to get to and from Manhattan, and neighborhoods grew up around its stations. The subway came later, and in some places it followed the railroad's route or replaced it. The pattern is one of overlapping systems, laid down in different eras and for different purposes.

The result is that a trip in Queens can be made in several ways, and the right one depends on where you are going. A rider can take the subway to the park, a bus to a shopping street, or a train to the city's edge. The system is not elegant, but it is flexible. And the MTA, which runs it all, has been working to make the pieces fit together better, though its fare structures and schedules remain separate.

Using the branch

A few practical notes for a first trip.

  1. Check the timetable. LIRR trains do not run as often as the subway; the MTA's schedule gives the departure times.
  2. Know your destination terminal. The branch serves Penn Station and Grand Central, and which trains go where varies by time of day; confirm before boarding.
  3. Buy or tap your fare before you board. The LIRR has its own ticketing, and its stations and apps explain how to pay. A ticket bought on the train can cost more than one bought in advance.
  4. Compare the ride times. A trip from Flushing Main Street to Penn Station on the LIRR is much shorter than the 7 to Times Square, and the difference matters if you are in a hurry.
  5. Consider the destination. If you are going to a Queens neighborhood between Flushing and Midtown, the 7 is the better choice, since the railroad skips most of them.

The larger point

The Port Washington Branch is a small thing, a few stops on a railroad most New Yorkers never ride. But it opens a window onto something the city does well and talks about badly: it is a region of overlapping systems. You can take a subway, a commuter train, a bus or a ferry, often within a few blocks of each other, and the choice depends on where you are going, when and how much you want to pay. A city of 8,584,629 people, by the Census Bureau's July 2025 estimate, needs all of them.

For the neighborhoods the 7 serves, the walk in Riding the 7 train to Flushing covers each stop. For Queens as a whole, and how it fits into the five boroughs, see the five boroughs and their counties. And if you find yourself in Flushing after dark, with the choice between the 7 and the LIRR in front of you, now you know what each one offers.

Related city government

Related guides

Related neighborhoods

Latest on this topic